Working principle

Clean hot air through the valve plate allocation into the bed, the wet material from the feeder into the fluidized state, such as boiling water in the bed jumping, so called boiling dryer (boiling dryer), because hot air and materials widely contact, so in a shorter time can be dry. From one end of the bed, a few minutes to a few 10 minutes of "boiling", from the other end of the bed automatically outflow. 

Application range

Boiling dryer, also known as fluidized bed, since the application of more than 30 years, has been continuous improvement, improve, in the pharmaceutical, chemical, food, food processing and other industries widely used, such as: raw materials, granule medicine, granules, feed, plastic resin powder, granular materials such as dehumidification, drying. The material particle size can be in the 0.1~6mm range, the best for 0.5~3mm. 

Installation Instructions

Boiling bed, cyclone separator and bag filter are placed on the flat cement floor, without the need for foot screws. The fan can be installed indoors or outdoors, with base and foundation screw. The layout can be adjusted according to the plant situation as appropriate.
Air Duct system should not leak, so as not to affect the drying effect. 

Heating method

Steam or electric heating, you can also use fuel (or coal) hot stove directly get hot air.

Technical Specifications