Conical twin screw mixer is a new type of high efficiency and precision mixing equipment, widely used in pharmaceutical, chemical, feed and other industries of a variety of powder materials mixing. The conical twin-screw mixer is more suitable for mixing materials without dead corners, comparing serious differences with mixing ratios.
Application of twin screw conical mixer:
twin-screw conical mixer is a new type of high efficiency and precision mixing equipment. Widely used in pharmaceutical, chemical, feed and other industries of a variety of powder materials mixing. The rotation and rotation of the twin-screw conical mixer is accomplished by a group of motors and cycloid needle wheel double output reducer, with two helical asymmetric agitation, making the mixing more uniform and mixing faster. Double Spiral cone Mixer has a set of motors and cycloid needle reducer to complete, with two spiral asymmetric stirring, so that the material mixing range is large, mixing speed is fast, contrast weight is very wide, the larger the mixture, the more suitable. The contact part of this machine is made of stainless steel.
Working principle of twin screw conical mixer:
The double Helix cone mixer consists of a transmission mechanism, a conical tube, a double spiral cantilever mixer and a discharge valve. The two spiral cone mixers have two different rotation radii and spirals in different lengths of conical cylinders for three-dimensional composite motion. At the same time, two spirals also do rotational motion. Under the action of the agitator, the material is hoisted along the shaft and lifted to complete the mixing action. The transmission part has the movement of rotating motor and rotary motor, and passes through worm, worm wheel (cycloid needle reducer) and gear at reasonable speed, and then passes to the spiral to make the spiral two kinds of motion. The helical part of the cone mixer consists of two asymmetric spiral arms for rotation and rotation. CYLINDER cover: Cylinder head supports the entire transmission part. The drive part is bolted to the cover and has a number of holes for inlet, observation, cleaning and maintenance. The outlet valve of the conical mixer is to install the discharge valve at the bottom of the cylinder block, and the discharge valve can be divided into two parts, namely, breakage and movement.