Equipment overview
Square Vacuum Dryer is the drying material in the vacuum conditions, heating and drying, if the use of vacuum pump to pump the wet, the drying rate is accelerated.
Note: If the condenser is used, the solvent in the material can be recycled through the condenser, such as the use of SK series water ring vacuum pump or ZSWJ series hydraulic injection vacuum pump unit, can not use the condenser, save energy investment.
Characteristics
1. The boiling point of the material solution under vacuum is reduced, so that the heat transfer force of the evaporator increases, so the heat transfer area of the evaporator can be saved by certain heat transfer.
2. Evaporation operation of the heat source can be used low-pressure steam or waste heat steam, evaporator less heat loss.
3. Can be disinfected before drying, drying process without any impurities mixed, in line with the GMP requirements.
4. It belongs to static vacuum dryer, so the form of dry material will not be damaged.
The equipment can be used A3 (carbon steel), 304 stainless steel, 316L production, with special requirements can be customized.
Engineering pictures